Innatank®
Innatank® is the ground-breaking integrally bunded storage tank from Forbes.
Providing safe storage of hazardous liquids to the very highest levels of environmental protection.
Innatank®’s genuinely innovative design, consists of a helically wound tank with a separate close fitting bund which is assembled with the tank as one piece to enable ease of installation. Combined with the fail-safe overfill prevention and leak detection system, the Innatank® offers exceptional efficiency and uncompromising safety.
Being a tank in an integral bund with over the top discharge if required, Innatank offers an intrinsically safe method of storing and processing hazardous liquids.
Environment and personnel are fully protected against leakage or spills. Limited connections or breaches below liquid level through the tank or bund wall and continuous leak monitoring, which can give local or remote alarms, give complete peace of mind.
Efficient & Economical
The space-saving design with its small footprint allows for greater storage efficiencies and is easy to install.
Large cost saving with no civil bund required.
Reduced Maintenance
No maintenance is required other than routine external inspection and checking the built-in monitoring system. No arrangements required to maintain the traditional bund from ingress of rainwater and eliminates the danger of flotation.
Built to Last
Design life of 20 years alongside guarantees of up to 10 years (duty dependent). Exceptional chemical resistance as with all Forbes products.
System Options
Monitoring
- Continuous Bund Monitoring Alarm System
- Local alarm
- Remote alarm (via phone if required)
Discharge
- ‘Over the top’ discharge system with or without dual containment pipework
- Lockable if required
- Supplied with pump system for priming only or to feed your process
- Air priming discharge system complete with small air pump
- Suction dip pip to allow for sludge removal
Filling
- Available with or without dual containment pipework
- Lockable if required
- Fail safe ‘overfill protection’ system not requiring an overflow
- To be filled from tanker by pad air or pumped delivery
Contents Gauging
- Pneumatic – with or without auto pump
- Float & follower (Cat & Mouse)
- Ultrasonic/Radar
Further Options
- Access to roof of tank – Ladder and handrail assembly
- Vent duct and scrubber for fuming liquids
- Immersion heating
Technical Specifications
- Integral bund featuring 'over the top' discharge
- Total containment providing exceptional safety
- Small footprint - no requirement for a civil bund
- Capacities of up to 50 cubic metres
Capacities in excess of 50m³ and certified to DVS2205 & EN12573. The leakage prevention system (conforming to BS EN 13616) prevents overfilling. Innatank conforms to the requirements of the Environmental Agency’s document PPG 2.
The sizes given are our most economical suggested dimensions for a given volume. All of our tanks are built to order, and any of these dimensions can be modified to suit specific restrictions and requirements.
To discuss your specific needs further please contact us.
3000mm
3500mm
4000mm
3000mm
Innatank® Range with 3000mm inside diameter.
| Model | Capacity (Litres) | Inside Diameter (mm) | Wall Height (mm) | Cone Top (mm) |
|---|---|---|---|---|
| Innatank® 30/16 | 16000 | 3000 | 2900 | 405 |
| Innatank® 30/18 | 18000 | 3000 | 3150 | 405 |
| Innatank® 30/20 | 20000 | 3000 | 3450 | 405 |
| Innatank® 30/25 | 25000 | 3000 | 4150 | 405 |
| Innatank® 30/30 | 30000 | 3000 | 4900 | 405 |
3500mm
Innatank® Range with 3500mm inside diameter.
| Model | Capacity (Litres) | Inside Diameter (mm) | Wall Height (mm) | Cone Top (mm) |
|---|---|---|---|---|
| Innatank® 35/20 | 20000 | 3500 | 2680 | 470 |
| Innatank® 35/25 | 25000 | 3500 | 3200 | 470 |
| Innatank® 35/30 | 30000 | 3500 | 3720 | 470 |
| Innatank® 35/35 | 35000 | 3500 | 4240 | 470 |
| Innatank® 35/40 | 40000 | 3500 | 4750 | 470 |
4000mm
Innatank® Range with 4000mm inside diameter.
| Model | Capacity (Litres) | Inside Diameter (mm) | Wall Height (mm) | Cone Top (mm) |
|---|---|---|---|---|
| Innatank® 40/20 | 20000 | 4000 | 2200 | 540 |
| Innatank® 40/25 | 25000 | 4000 | 2600 | 540 |
| Innatank® 40/30 | 30000 | 4000 | 3000 | 540 |
| Innatank® 40/35 | 35000 | 4000 | 3400 | 540 |
| Innatank® 40/40 | 40000 | 4000 | 3800 | 540 |
| Innatank® 40/45 | 45000 | 4000 | 4200 | 540 |
| Innatank® 40/50 | 50000 | 4000 | 4600 | 540 |
Speak to our sales team to find out more.
+44 (0)1366 389600
